M2 — Principal Lunar Semidiurnal
The primary gravitational tide raised by the rotation of the Earth relative to the orbiting Moon twi...
The Mm constituent represents the lunar monthly long-period constituent component in harmonic tidal prediction. In classical analog tide-predicting machines, this partial wave was generated by an oscillating crank and Scotch yoke driven by a designated gear train.
0.544375°/hr661.3092 hours065.4554.2% of M2The Moon’s orbital distance variation over the anomalistic month (27.55 days between successive perigees).
Influences long-term estuarine sediment transport by modulating monthly baseline water depth.
The slowest astronomical harmonic on most standard tide machines, completing only ~13 revolutions in an entire year of prediction.
Gear Ratio Implementation:
Ultra-high ratio gear reduction translating solar drive rotation down to 0.5443747°/hr.
On historic calculators such as US Coast Survey Machine No. 2 ("Brass Brains") and the Bidston Observatory Doodson-Légé machines, each shaft had to maintain exact angular synchronisation with solar clockwork over 8,760 hours of continuous calculation without drifting out of phase.
How did an analog computer technician dial the Mm constituent into a brass tide-predicting machine before a 365-day charting run? Follow the standard hydrographic office protocol:
Analog computers were governed by the laws of friction, backlash, and mechanical tolerances. Operating the Mm constituent presented distinct physical challenges:
| Known Error Source | Observed Mechanical Symptom | Historical Corrective Action |
|---|---|---|
| Cumulative phase backlash in high-ratio reduction gear trains | Phase error of up to 12 hours in monthly baseline shift by year end. | Pre-load the Mm gear train with a reverse torsional spring to keep gear teeth loaded on the driving face. |
For a complete review of analog calculation tolerances, see our study on Friction, Backlash, and Wire Stretch: Where Error Lived in Brass Computers.
Because each body of water resonates with different astronomical frequencies, the amplitude of Mm varies dramatically around the globe:
| Reference Harbor | Typical Amplitude | Local Tidal Characteristics |
|---|---|---|
| Gulf of St. Lawrence, Canada | 0.09 m | Modulates monthly navigability in shallow passages. |
| Oslo, Norway | 0.05 m | Microtidal harbor where long-period components govern water level datums. |
| Caspian Sea (Tide Stations) | 0.03 m | Measurable long-period lunar perturbation in enclosed inland water. |
Observe how Mm interferes with other harmonic waves on our virtual brass analog synthesizer. Adjust frequency, amplitude, and phase angle interactively.
Launch Harmonic Synthesizer ›The period of Mm is 661.3 hours (approximately 27.55 days), which corresponds exactly to the lunar anomalistic month from perigee to perigee.
In the open ocean, Mm typically accounts for 2 to 10 centimetres of water level variation, but this baseline shift can be critical when combined with storm surges.
Yes, Rollin Harris included Mm as one of the 37 constituents on US Coast Survey Machine No. 2 because of its necessity for accurate annual tide tables.
The primary gravitational tide raised by the rotation of the Earth relative to the orbiting Moon twi...
The gravitational tidal force exerted by the Sun as Earth rotates once every 24 mean solar hours....
The variation in lunar distance due to the elliptical eccentricity of the Moon’s orbit as it moves b...
The declination of both the Moon and Sun north and south of Earth’s equator during their orbital cyc...